Up
FE Calc
BBY ScatCat
RRR Rigger
BBY Oval Master
OnTheBench
Maus Shovelnose
Climate Matrix
Viper Turbine
BBY Volcanic Splash
Bandit Hydro
BBY Oval Master | BBY Oval Master | This was my first ground-up mono hull boat and my second mono hull to add to the fleet. The first one is a Speed Vee 80 and started me in the FE boat hobby. This mono plane required the full trimming of the hatch and hull sections (it was from a no trim sale at BBY) and then the joining of the two halves. I learned a lot from this boat as I made my own motor mount, servo mount and a custom cooling jacket for the motor. All the parts were made from light weight aluminum. I don't have any pictures of this boat in action but it turns very well and handles some chop in the water that is at least 12" high, (quite the maiden voyage !) | | Setup 1 | | Motor | Fantom 12X3 (D4 based) | | ESC | RC Hydros | | Hardware | Fullers Super | | Servo | Hitec | | Receiver | FMA Fury | | Prop | Octura X432 | | Batteries | 6 Cells | | Misc | E Cubed Black Cat internal antenna |
| Setup |  | Close up of inside of the boat, you can see the custom cooling coil, motor mount and part of the servo mount. This motor also has brush cooling installed. Fantom D4 12X3, Fullers super hardware, Hitec servo, FMA Fury receiver and RC Hydros ESC, X432 |  | Side view of the oval master in dry dock. Fantom D4 12X3, Fullers super hardware, Hitec servo, FMA Fury receiver and RC Hydros ESC, X432 |  | The transom end, good view of the Fullers next generation hardware. Fantom D4 12X3, Fullers super hardware, Hitec servo, FMA Fury receiver and RC Hydros ESC, X432 | Pictures |  | Coming Soon! | Video | | Coming Soon | | | |
|
